Characteristics of homogeneous multi-core fibers for SDM transmission

We describe optical data transmission systems using homogeneous, single-mode, multi-core fibers (MCFs). We first briefly discuss space-division multiplexing (SDM) fibers, observing that no individual SDM fiber offers overwhelming advantages over bundles of single-mode fiber (SMF) across all transmission regimes. We note that for early adoption of SDM fibers, uncoupled or weakly coupled fibers which are compatible with existing SDM infrastructure have a practical advantage. Yet, to be more attractive than parallel SMF, it is also necessary to demonstrate benefits beyond improved spatial spectral efficiency. It is hoped that the lower spread of propagation delays (skew) between spatial channels in some fibers can be exploited for improved performance and greater efficiency from hardware sharing and joint processing. However, whether these benefits can be practically harnessed and outweigh impairments or effort to mitigate cross talk between spatial channels is not yet clear. Hence, focusing on homogeneous MCFs, we first describe measurements and simulations on the impact of inter-core cross talk in such fibers before reporting experimental investigation into the spatial channel skew variation with a series of the experimental results including a comparison with SMF in varying environmental conditions. Finally, we present some system and transmission experiments using parallel recirculating loops that enable demonstration of both multi-dimensional modulation and joint digital processing techniques across three MCF cores. Both techniques lead to increased transmission reach but highlight the need for further experimental analysis to properly characterize the potential benefits of correlated propagation delays in such fibers

All-fiber mode-group-selective photonic lantern using graded-index multimode fibers

We demonstrate the first all-fiber mode-group-selective photonic lantern using multimode graded-index fibers. Mode selectivity for mode groups LP01, LP11 and LP21 + LP02 is 20-dB, 10-dB and 7-dB respectively. The insertion loss when butt coupled to multimode graded-index fiber is below 0.6-dB. The use of the multimode graded-index fibers in the taper can significantly reduce the adiabaticity requirement

Field trial of SDN-controlled probabilistic constellation shaping supporting multiple rates over a coupled-core multi-core fiber

A SDN controller configures probabilistic constellation shaping through NETCONF optimizing spectral efficiency according to the path length or degradations due to soft failure. The integrated data and control planes are demonstrated with multiple rates (800-850-900-950-1000Gb/s) in a field trial employing multi-core fiber with 4-coupled cores

Space Division Multiplexing in Optical Fibres

Optical communications technology has made enormous and steady progress for several decades, providing the key resource in our increasingly information-driven society and economy. Much of this progress has been in finding innovative ways to increase the data carrying capacity of a single optical fibre. In this search, researchers have explored (and close to maximally exploited) every available degree of freedom, and even commercial systems now utilize multiplexing in time, wavelength, polarization, and phase to speed more information through the fibre infrastructure. Conspicuously, one potentially enormous source of improvement has however been left untapped in these systems: fibres can easily support hundreds of spatial modes, but today's commercial systems (single-mode or multi-mode) make no attempt to use these as parallel channels for independent signals.Comment: to appear in Nature Photonic

High capacity transmission with few-mode fibers

We experimentally investigate high-capacity few-mode fiber transmission for short and medium-haul optical links. In separate experiments, we demonstrate C + L band transmission of 283 Tbit/s over a single 30 km span and recirculating loop transmission of 159 Tbit/s over 1045 km graded-index three mode fiber. The first experiment reached a data-rate per fiber mode within 90% of the record data-rates reported in the same transmission bands for single-mode fibers. The second experiment demonstrated the feasibility of reaching high data-rates over long distance few-mode fiber transmission, despite strong impairments due to mode-dependent loss and differential mode delay

Lowloss mode coupler for mode-multiplexed transmission

Abstract: We present a novel low-loss 3-spot mode coupler to selectively address 6 spatial and polarization modes of a few-mode fiber. The coupler is used in a 6 × 6 MIMO-transmission experiment over a 154-km hybrid span consisting of 129-km depressed-cladding and 25-km graded-index few-mode fiber

Rate Optimized Probabilistic Shaping-Based Transmission Over Field Deployed Coupled-Core 4-Core-Fiber

Multi-core fiber (MCF) transmission is a promising solution to support ever-increasing future traffic demands. Compared with uncoupled-core MCFs [1], the induced strong coupling in coupled-core (CC)-MCFs reduces the nonlinearity impact [2]. Transmission in these fibers leverages both spatial and wavelength division multiplexing and it has been experimentally tested mainly considering uniform quadrature amplitude modulation (QAM) formats [3]. Spectral efficiency can be further optimized by employing probabilistic shaping (PS) but the joint use of CC-MCF and PS has been rarely investigated [4]. In this paper, we present a transmission of PS signals through an infrastructure based on a CC-four core fiber (CC-4CF) deployed in the city of L'Aquila, Italy [5]. We ran experiments comparing the performance of standard polarization multiplexed 16QAM and PS-32QAM signals at a symbol rate of 30 GBaud: 800 Gbps net rate considering the spatial super-channel over four cores. We used the generalized mutual information (GMI) as performance metric and averaged over the 8 polarizations concidering the central channel. A realistic threshold (GMIth) of 3.6 bits/symbol (per spatial mode and polarization) has been set as a target: it is a typical value that guarantees post-FEC error-free transmission for most realistic SD-FEC

Heterogeneous space-division multiplexing and joint wavelength switching demonstration

We demonstrate a six spatial-mode, wavelength-routing network interoperable with few-mode, coupled-multi-core, and single-mode fiber spans using a custom 57-port wavelength-selective switch configured for joint-switching of spatial-superchannels

Overcoming degradation in spatial multiplexing systems with stochastic nonlinear impairments

Single-mode optical fibres now underpin telecommunication systems and have allowed continuous increases in traffic volume and bandwidth demand whilst simultaneously reducing cost- and energy-per-bit over the last 40 years. However, it is now recognised that such systems are rapidly approaching the limits imposed by the nonlinear Kerr effect. To address this, recent research has been carried out into mitigating Kerr nonlinearities to increase the nonlinear threshold and into spatial multiplexing to offer additional spatial pathways. However, given the complexity associated with nonlinear transmission in spatial multiplexed systems subject to random inter-spatial-path nonlinearities it is widely believed that these technologies are mutually exclusive. By investigating the linear and nonlinear crosstalk in few-mode fibres based optical communications, we numerically demonstrate, for the first time, that even in the presence of significant random mixing of signals, substantial performance benefits are possible. To achieve this, the impact of linear mixing on the Kerr nonlinearities should be taken into account using different compensation strategies for different linear mixing regimes. For the optical communication systems studied, we demonstrate that the performance may be more than doubled with the appropriate selection of compensation method for fibre characteristics which match those presented in the literature

Complex regional pain syndrome 1 – the Swiss cohort study

BACKGROUND: Little is known about the course of Complex Regional Pain Syndrome 1 and potential factors influencing the course of this disorder over time. The goal of this study is a) to set up a database with patients suffering from suspected CRPS 1 in an initial stadium, b) to perform investigations on epidemiology, diagnosis, prognosis, and socioeconomics within the database and c) to develop a prognostic risk assessment tool for patients with CRPS 1 taking into account symptomatology and specific therapies. METHODS/DESIGN: Prospective cohort study. Patients suffering from a painful swelling of the hand or foot which appeared within 8 weeks after a trauma or a surgery and which cannot be explained by conditions that would otherwise account for the degree of pain and dysfunction will be included. In accordance with the recommendations of International Classification of Functioning, Disability and Health (ICF model), standardised and validated questionnaires will be used. Patients will be monitored over a period of 2 years at 6 scheduled visits (0 and 6 weeks, 3, 6, 12, and 24 months). Each visit involves a physical examination, registration of therapeutic interventions, and completion of the various study questionnaires. Outcomes involve changes in health status, quality of life and costs/utility. DISCUSSION: This paper describes the rationale and design of patients with CRPS 1. Ideally, potential risk factors may be identified at an early stage in order to initiate an early and adequate treatment in patients with increased risk for delayed recovery